Basement Waterproofing

Basement waterproofing is a process which involves the injection of a chemical into the foundation walls of a home. It is an inexpensive solution which helps prevent moisture from damaging the structure of a home. The chemical helps to eliminate mold and mildew growth in wet areas and can also protect your basement from flooding.

Interior waterproofing

Interior waterproofing for basement walls is a less intrusive method of solving moisture issues. It is also an inexpensive fix. Unlike exterior waterproofing, which requires excavation, interior waterproofing involves sealing cracks and leaks.

The key is to find the source of the problem. This could be a window well, a leak in the foundation, or pipes. You can easily find these problems by examining the concrete. Look for wet streaks in the mortar joints or along the edges of the windows.

Another step is to look at the drainage system. This may include a sump pit and pump. A sump pit is a large basin, usually under the foundation, that collects excess groundwater before it reaches the basement floor. When the water level reaches a certain point, the sump pump will begin pumping the water out.

Another step is to use a vapor barrier. Vapor barriers are foil sheets that form a watertight seal.

If your basement is wet, there’s a good chance the foundation is leaking. One of the best solutions is to have a reputable foundation contractor evaluate the situation. There are many different types of waterproofing products on the market.

The best part is that interior basement waterproofing is easy to do. For most systems, you can have a new drainage system in place in a couple of days.

Foundation crack injections

Foundation crack injections are a great way to fix foundation leaks. They are a permanent, reliable solution. The process involves a chemical that expands to fill the crack.

There are two kinds of crack injections: high pressure and low pressure. High pressure is used to fill cracks in thick-walled structures. Low pressure is more effective in basement walls.

Foundation crack injections use either polyurethane or epoxy. Polyurethane is a water-repellent material that will not break down and forms a seal that will prevent water from entering the crack. Epoxy is more resistant to water seepage but can break down if it is exposed to moisture.

Injections can be applied indoors or outdoors. Most contractors guarantee their work with a transferable warranty. It is important to find a professional to do the work.

Cracks in concrete foundation walls are usually diagonal or vertical. Water enters through the crack and can form channels. A professional can help you prevent this from happening.

For larger cracks, you may need to drill an injection port into the crack. This will ensure that the chemical is injected at the correct depth. You can then remove the port and sand the area.

Cracks are common in basement walls. They can be caused by shifting soil outside the home.

Mold and mildew growth in a wet basement

Mold and mildew growth in a wet basement is a serious problem. If left untreated, it can lead to structural failure and can cause serious health problems. A simple solution is to cut down on the moisture in your home.

Basements are naturally humid and tend to collect water. In addition, they are cooler than other parts of the house, making it an ideal place for mold to grow.

Mold and mildew growth in a basement can be a sign of a leak in the pipes or foundation. Using a dehumidifier can reduce the amount of moisture in your basement. This will make it less likely to have mold and mildew growth in the future.

To get rid of mold, you will need to clean the affected area. You should start by removing any wet objects. Then, you will need to use a spray-on cleaner that is designed to kill mold.

Be sure to wear protective clothing and eyewear. Some forms of mold can irritate the respiratory system and may result in coughing, wheezing, itching, and even asthma attacks.

It is also important to make sure there is proper ventilation in your basement. Mold spores can enter the home through cracks and open windows.

There are many methods to get rid of mold and mildew. These include using a spray solution, applying a baking soda and water mixture, or hiring a professional to clean your basement.