If your basement is prone to water damage, you may want to invest in a good waterproofing system. These systems use various materials and techniques to keep water from penetrating the basement. Depending on the depth of the basement, they may also include sump pumps and drains. Regardless of the method you choose, you’ll be glad you took action to protect your home.
Weeping tile is a system of pipes with slits that are buried next to a foundation wall. The pipes are surrounded by gravel to prevent soil from blocking the slits. The gravel is then covered with 3/4 inch clear gravel to increase drainage and protect the weeping tile.
The weeping tile system is effective at preventing water from permeating through the foundation wall. But it needs to be installed properly. If the tiles are not installed correctly, water will leak into the basement. Older homes may also have clay pipes that must be replaced with plastic pipes and covered with rot-proof permeable material.
If you are looking for an effective waterproofing system for your basement, weeping tile is a great solution. Weeping tiles are four-inch pipes that are installed beneath the foundation walls to channel water away from the home. Without these tiles, water would build up and sit near the foundation wall, which would result in a wet basement.
Cementitious coating is a waterproofing method that uses cement-based polymer coatings to create a strong barrier against moisture. These coatings are applied on the basement or foundation walls to prevent water from seeping in. Two-component cementitious coatings, such as Corroprufe FCW, contain both solid and liquid components that work together to create a waterproof barrier and excellent crack bridging properties.
Basement walls should be a minimum of six inches in thickness. Lightweight aggregate, which can be calcined blast furnace slab, clay, shale, or gravel, is used to reinforce walls. In addition, the wall’s minimum compressive strength should be 2000 psi. The use of internal-disconnecting form ties is preferred over twisted wire type form ties. When removing forms, the entry holes should be sealed with mortar.
Cementitious coatings for basement waterproofing can be purchased from many manufacturers and distributors. These products are more expensive, but they offer more flexibility and a better guarantee for waterproofing.
A spray-applied waterproofing membrane is a great choice for residential basements. It has a fast cure time and can achieve virtually any desired thickness in one application. Its performance characteristics are astounding, especially considering its rubber-based composition. Firestone Building Products’ RubberGard EPDM membrane is an excellent choice for basement waterproofing, and is designed for ease of application.
A well-designed waterproofing system will keep basement water out and prevent water from getting under the foundation. It’s important to choose a product that is designed to be durable and long-lasting. Concrete is not waterproof and often cracks if it gets wet. Water can also swell and weaken the soil underneath your foundation. Proper drainage is essential for preventing water from getting into your basement. A liquid applied waterproofing membrane will provide a seamless and impermeable layer that will protect your home against leaks and other moisture problems.
Another method for waterproofing a basement is using a vapor barrier. Vapor barrier systems can be installed on a concrete floor, basement walls, and basement crawl space. This type of waterproofing can cost between $1,500 and $3,000.
New Build Reinforced Concrete
Basement waterproofing is an important part of protecting your home. There are various ways to do this. However, one of the most common methods is to use asphalt tanking. This method is suitable when the water table in the soil is not very high. It involves applying a layer of DPC 30 mm thick in three coats to the entire floor area of your basement, as well as to the external face of the basement walls. This material must be at least 15 cm above ground level to prevent water from penetrating the walls. A protective floor is usually installed over this surface during the construction process.
Another method to waterproof your basement is to use a waterproof membrane. This is often available in sheets, which builders stick together with a hot tar-based adhesive. The downside to using self-adhesive membranes is that they do not last as long as membranes that adhere to the wall with a separate adhesive. Liquid-applied membranes are also available. These typically consist of a primer coat and up to two coats of waterproofing. The liquid membrane is applied by a builder using a brush or a spray. However, a liquid membrane is prone to tearing and breaking when applied improperly.