How to keep your basement dry

If you’ve discovered water in your basement, you probably want to know how to keep it dry. This article will tell you how to insulate unfinished concrete, pipes, and exterior walls. ThermalDry Subfloor Matting is another solution for a wet basement. You can also install a wet-dry vacuum. If you don’t have the money to hire a professional, here are a few things you can do yourself to keep your basement dry.

Insulate pipes

The most obvious and simplest way to ensure that your basement stays dry is to insulate the pipes in it. Using inexpensive foam or plastic insulation can be applied to pipes that run through your basement. Cutting the insulation is easy with an ordinary pair of scissors. It is also important to tape the insulation around the pipes. If you have concrete walls, waterproof coating can be applied. You can purchase this material at a hardware store. Be sure to strip off any wallpaper or paint from the walls first.

In addition to preventing the cold water pipes from freezing, the insulation can help limit condensation along the water pipes. Since basements tend to be damp spaces, water can condense on these pipes, resulting in mold and moisture damage to your basement’s belongings. If you want to prevent this from happening, you should install insulation around the pipes before the temperature drops in the winter. You can purchase inexpensive foam insulation sleeves and pipe wrap from a local home improvement store.

You should also consider insulate the pipes that run through unheated areas. Uninsulated pipes are prone to freezing and can cause major damage to your home. This damage can lead to mold and water damage, which are both unhealthy and expensive. The simplest way to prevent freezing and burst pipes is to insulate them. You should already be doing this for the hot water pipes, but if you’re insulating the pipes that run through unheated areas, you can do this as well.

Insulate exterior walls

You can add insulation to the exterior walls of your basement if you plan to finish it. The process can be done at any time of the year and you can even do it yourself. The best thing about this type of insulation is that it costs less than conventional construction adhesive and will achieve high insulating values. Additionally, you won’t disturb your landscaping. One caveat: you should not add insulation to a basement that already has moisture problems. Adding more insulation to this area can lead to rot and mold, so you should avoid it.

While it is possible to add insulation to exterior walls of your basement, a double brick or rubble-filled wall will do the trick. While exterior basement insulation is more costly, it can be very beneficial to prevent foundation cracking due to the freezing and thawing cycle. For example, you can use closed-cell spray polyurethane foam to combat dampness problems on rubble walls. However, you should remember that this type of insulation is only effective when done by a certified installer and covered with fire-retarding material. Depending on the humidity levels in your basement, you may not need to install insulation in exterior walls. Alternatively, you can simply treat the floor joist space as an exposed floor. However, you should be aware that additional modifications may be needed to accommodate your heating system and plumbing.

If you’re unsure of how much insulation to use, consider using spray polyurethane foam. This is slightly more expensive than foam boards, but it will provide great insulation to your basement. R-10 insulation is the minimum required by building codes, but many energy experts recommend R-15 or higher. The savings of R-10 insulation in Minnesota or Washington DC can range from $250 to $400. It will also keep your basement warmer and dryer than it was before.

Insulate unfinished concrete

The first step in keeping your basement dry is to enclose the entire area with waterproofing material. This can be achieved with several different methods. You can install insulation on unfinished concrete walls or put up drywall. However, if you’re not sure whether to use interior or exterior insulation, consider both approaches. Interior insulation is more affordable and easier to install than exterior insulation. You can use a combination of both methods if you want to keep the basement dry and comfortable.

Rigid mineral wool boards can be framed and installed against unfinished concrete surfaces. You can also place mineral wool batt insulation into the cavity of newly framed walls. The benefits of this method are that it is moisture resistant, and it also eliminates the need for a plastic moisture barrier. Before you get started, be sure to measure and mark the location of the chalk line. Make sure that you’re at least 4 inches away from the insulation.

Another effective method is to seal the concrete walls. This will prevent moisture from absorbing through the walls. This method costs anywhere from $1 to $8 per square foot. Moreover, it’s a cheap alternative to waterproofing. It prevents moisture from seeping through the concrete walls and can be used in areas that aren’t waterproofed. And it can help hide structural problems, such as cracks in the foundation.

Install ThermalDry Subfloor Matting

If you’re planning to install new carpet in your finished basement, ThermalDry(r) Subfloor Matting is the perfect solution. This patented product is 100% waterproof, creates a vapor barrier and provides a thermal break. It also helps prevent moisture absorption, keeping your floor 8-10 degrees warmer than concrete. Best of all, it doesn’t require any adhesives or grout, making it a quick and easy installation.

ThermalDry Basement Flooring is a water-resistant floor tile that mimics the look and feel of stone or carpet. It is easy to clean and replaces itself if damaged. These tiles come in charcoal carpet tones to help you match your existing decor. ThermalDry Subfloor Matting consists of square tiles that snap together for a perfect subfloor. The tiles keep the surface 8-10 degrees warmer than concrete, and they won’t absorb moisture or attract mold. ThermalDry Subfloor Matting is also compatible with a variety of other types of flooring, including rugs and carpet.

Traditional basement finishing methods use a wood subfloor and carpet on top. Both materials can become damp, as humidity rises through the concrete floor and accumulates underneath. It is also not ideal to install traditional carpeting directly on concrete. Wood subfloors are also susceptible to moisture damage, as wood absorbs humidity. If you’re planning on installing carpet, consider installing a waterproof subfloor instead.

Seal cracks in the foundation

When it comes to waterproofing your basement, sealing cracks is an essential first step. While a liquid sealant is easy to apply, a waterproofing cement can provide more protection. Its high-viscosity polymer penetrates cracks and creates a durable seal that prevents moisture from entering the basement. Then, you should add a dehumidifier to reduce condensation, which can lead to mold and mildew.

Another sign of foundation water seepage is if the foundation walls are wet. If this happens, water may start seeping through them intermittently after rains. If you notice efflorescence, a white powdery substance on the surface of the concrete, then it is likely that your foundation walls are saturated with water vapor. Although these symptoms may not be life-threatening, they are a sign that the foundation walls are leaking and require repair.

The process of repairing foundation wall cracks depends on the type of foundation. If the walls are made of poured concrete, they can be sealed with a flexible expanding urethane sealant. On the other hand, a block, brick, or stone foundation is comprised of many individual pieces that are held together by porous mortar. In this case, it is best to repair the cracks from the outside with an elastomeric membrane. If this doesn’t work, you can always install a tear resistant liner inside the basement to keep the moisture out.

Install French drains

While exterior drains are ideal for stormy weather, interior drains can be difficult to install without tearing up the existing concrete. They also cost more money than exterior drains because they require digging a large hole. Installing an interior drain is also impractical for finished basements because they require the removal of existing concrete. They also may not be as effective for stone and brick foundations. The only advantage of an interior drain is that they don’t detract from the aesthetic appeal of your basement.

A wet basement will also produce odors and mold and can reduce the value of your property. In addition, it may be hard to sell your home if it has a damp basement. French drains should be installed between two and five feet from your basement foundation. The exact distance varies depending on several factors. Before installing your French drains, you should measure the height of the footer and check the amount of standing water during heavy rains.

Interior French drains are more difficult to install because they need to be dug into the basement walls and foundation. If you’re not a handyman, you should hire someone to do the job. Large power tools and professional assistance are required. This project will cost upwards of $7000. This project should only be done if you have extensive experience in tearing up basement floors and walls. The installation process should take a couple of days.