How to keep your basement dry

If you’re wondering how to keep your basement dry, here are some tips to follow. Among them: install a sump pump, insulate pipes, keep a window well drainage system in place, and seal cracks and holes in the foundation. If none of those measures work, you can always try painting over the problem areas. In older homes, several layers of paint may be present. This will prevent the sealer from adhering properly.

Installing a sump pump

When installing a sump pump to keep your basement completely dry, there are a few important things to consider. One of the most important factors to consider is the location of the low spot in your basement. A certified waterproofing specialist will be able to determine the exact location and run a PVC feed line from the low spot to the sump pump. A perimeter French drain system is also recommended, which is a system of clean stone surrounding the pump that is topped with clean stone.

You can choose between two types of pumps, the submersible and pedestal pumps. Submersible pumps sit in the sump pit and draw water out to a pipe outside the house or storm drain. Submersible pumps are larger and require a bigger sump pit and a lid that is airtight. Submersible pumps can also be noisy, so it’s a good idea to check with your local government before purchasing a new pump.

Insulating pipes

If you want to prevent water from flooding your basement, you may want to consider insulating your cold water pipes. These pipes are commonly exposed to cold outdoor temperatures and may freeze, which can cause a water damage. In addition, freezing pipes can create dangerous conditions due to mold growth and other damage. Insulating cold water pipes will help avoid these issues by preventing condensation on their surface. Listed below are some ways to ensure your basement remains dry during all seasons.

Make sure your basement walls have the proper insulation. This is the first step in waterproofing your basement. While many homeowners overlook this step, it’s vital to protect your basement from moisture and cold. Inappropriate insulation will allow water to seep into the basement, which will affect the foundation and cause costly damage. If you discover leaky pipes, you should repair them as soon as possible. Otherwise, installing sheetrock on top of insulating pipes can result in mold and rot.

Keeping a window well drainage system in place

If you have a window well in your basement, you need to keep it draining properly to prevent water from filling it. While most window wells come with built-in drainage systems, they can become clogged with debris and water over time. If left uncovered, water will continue to fill the window well and flood your basement. Fortunately, Fairfax Contractor has a solution to prevent this flooding.

One way to prevent water from filling your window well is to make sure that your gutters are set up to carry rainwater away from the foundation. You should also be sure that your downspouts do not end in the window well, because this will simply send even more water to it. If your window well is near the foundation, you should consider installing a window well drain system to prevent water damage. These drains are installed at the bottom of your window well and catch any water that threatens it. They can connect to a sump pump or even an underground French drain system.

Keeping cracks in the foundation closed

While it may not be a structural threat to your home, non-structural cracks can allow water to seep into your basement during rain storms or snow melt. Water seeping into a basement is a serious issue. Here are some ways to prevent water from getting into your basement. 1. Check for cracks. Look for large, unsightly cracks. Remove loose materials from cracks.

Check the walls for moisture. If there is a film of water on the walls, it might be condensation. To identify the source of the moisture, place a piece of aluminum foil on the wall. Leave it there for a day to see if any moisture forms underneath the foil. If the film is still wet, there is a leak somewhere in the foundation. If you have found visible moisture on the wall, you should inspect the cracks in the foundation.

Taking care of foundation issues as you go

Your home’s foundation is a vital part of the structure of your home. Without a stable foundation, your house will either collapse or sink into the mud below. Not all foundations are created equal, and clay-rich soil can lead to a weakened foundation. Taking care of foundation issues as you go to keep your basement dry starts with controlling moisture. If you plant trees too close to the house, they could cause major cracks in your foundation. Additionally, if you plant trees too close to your foundation, their roots may push into your home.

Another issue that could cause a wet basement is poor grading around your foundation. The soil should be sloping away from your house in the first four feet and gradually slope down after that. Grading around your foundation should be six inches for the first four feet from the foundation wall, and then it should slope down more gradually. If there are any basement windows sitting below grade, you should install a well around them to prevent water from penetrating into the basement.