Getting water out of your basement

Getting water out of your basement can be a daunting task, and it can take some time to figure out the right solutions. However, there are a few important steps that you can take to help ensure that you get the water out.

Drainage

Having a good drainage system is important for keeping your basement dry. Unfortunately, it’s not always easy to know what’s causing your water problems, or to determine the best solution.

One of the best ways to find out is to contact a building official in your area. They can provide tips on what to look for, and what kind of drainage systems are available in your area.

Another option is to create a waterproofing system on your foundation. Many installers include this in the construction of your home. You may also want to consider installing a sump pump to help remove water from your basement.

A French drain is an effective way to channel groundwater away from your basement. A french drain is a trench filled with rocks, gravel and other materials that help filter out dirt and other particles. It should be at least 12 inches deep and wider than the floor of your basement.

Waterproofing

Keeping your basement dry is not only a good investment, it can also help you avoid mold and mildew growth. This can lead to a host of health issues. In addition, it can increase your home’s value. A good solution for waterproofing your basement can save you time, money, and headaches.

The first step in waterproofing your basement is to check for any potential damage. Often, a foundation crack can allow water to enter. If there are cracks, sealing them with a special sealant is a common method.

Another solution is to install drain tile, which is also known as a French drain. This will collect water and send it to a sump pump pit. You can also use expanding foam to seal window wells.

Exterior waterproofing methods usually require more work and heavy equipment. These solutions will include soil grading and a drainage track. You will also need an external sump pump.

Moisture in new concrete

Whether your new basement is finished or unfinished, you may have noticed some condensation accumulating on the walls or floor. Moisture in new concrete is usually not the cause of a problem. However, it can be a contributing factor to a more serious issue.

To find out if your concrete is absorbing moisture, you can test the moisture content of your slab with a calcium chloride test. This simple test will tell you if the moisture content is high or low. If the result is positive, you will need to install some sort of drainage system to keep water out of your home.

If the answer is yes, then you will need to determine where the moisture is coming from. If you suspect the foundation, then you may want to seal off any cracks. You may also need to check your gutters.

Clogged drain lines

Keeping your drain lines in your basement clear can prevent the possibility of flooding. You can do this yourself by using a plunger. If you need assistance, you can call a plumber. However, if the problem is larger, you may need to have the drain cleaned by a professional.

Clogged drainage systems can cause water backup and damage your septic system. If your sewer line becomes clogged, you could end up with raw sewage in your basement. The sewage could also back up into your sink or bathtub.

The most common reason for a clogged basement drain is a clog in the main sewer line. This may be caused by tree roots, which are naturally growing towards moisture. These roots can enter your sewer line through cracks or weak points. They can also collapse the sewer line.

Subterranean level

Getting water out of your basement using the subterranean level isn’t always easy, but there are ways to prevent water from seeping through your walls and into your living space. For example, you can create a curtain drain to divert water away from your foundation. You can also install plastic extensions on your downspouts to prevent rainwater from getting into your house.

For a more palatable cost, you can hire a waterproofing contractor to install a permanent underground drainage system. Ideally, your downspouts should extend five feet from your house and be at least six inches above the ground. If you’re not handy, you can have a landscaper dig a sloping trench to catch runoff.

To keep water from getting in your house, you need to check your downspouts for debris. Clogged downspouts are the number one cause of water leaks. You should also do a checkup on your subsurface drainage system.