Getting water out of your basement

If your basement is full of water, you may be wondering how to get water out. There are several potential problems, including hydrostatic pressure, Non-structural wall cracks, and permanent underground drain pipes. If any of these are an issue in your home, it’s important to address them as quickly as possible. In this article, we’ll discuss the most common causes of basement water damage and possible solutions to the problem.

Hydrostatic pressure

When you notice that your basement is damp, you have likely experienced hydrostatic pressure. This phenomenon is caused when the soil around your foundation is not allowed to drain off and creates a pocket of water that pushes water into the basement through invisible cracks. When this pressure builds up, the water starts seeping up the exterior walls, and this pressure can eventually cause the wall to crack or bow. To find out if your basement is experiencing hydrostatic pressure, you should call a professional to conduct a free inspection of your home.

If you’ve tried various waterproofing solutions for your basement, you’ve probably found that they fail to completely seal out moisture. Additionally, they fail to address hydrostatic pressure, which is a factor in the soil’s resistance to water. Aside from hiring a plumber to repair your foundation, you can also fix your landscaping around the house to pitch water away from the foundation. Lastly, you should avoid adding soil within two inches of the foundation sill plate.

Non-structural wall cracks

When you have a crack in your foundation wall, there are a couple of reasons to take action. One is that it can let water into the basement, causing it to get ruined and contribute to the growth of mold. Another reason to act quickly is that if left untreated, the crack can become even worse. You should also check for small cosmetic cracks in concrete basement walls, as these are caused by the curing process.

If you notice a crack in your foundation wall that is one-eighth of an inch, you should immediately take action. However, if you notice a crack that is wider than a quarter of an inch, it is time to call a professional. Larger cracks will cost more to repair than small ones, so if you notice a small crack, it is not a good time to take action.

Permanent underground drain pipe

When you have a basement, you probably need to install a drain pipe to keep water out. This pipe will be buried underground, and can be covered with a grate or framed to keep out debris. Some drains are designed to be completely uncovered for maintenance and storage. You can even frame the pipe with walls to reduce square footage and keep the channel out of your living area.

If you don’t want to do it yourself, you can hire a landscaper to dig a trench outside your foundation. The trench should be as deep as your basement, but may be less for the crawl space. Once the trench is dug, you can lay a perforated drainage pipe over the dirt. You can also add a soil particle sock to prevent clogging.

Wet/dry vac

If there’s only a small amount of standing water in your basement, a wet/dry vacuum will be your best friend. This powerful tool allows you to remove water from areas where other equipment cannot reach. The nozzle of the machine can be used to empty water directly into a nearby bucket or other exterior area. This type of vacuum is great for smaller jobs, but it won’t be effective for deep water.

If your basement is fully wet, a wet/dry vacuum will help remove the mud and water. When the water is moist, it’s easier to wring it up. Remember that flooding water will destroy some of your possessions, so you should remove the walls at least 20 inches above the water level. If possible, remove all items that could be damaged by floodwater, such as carpet and flooring.

Sub-slab depressurization system

A sub-slab depressurization system for water out of your basement is an excellent way to get water out of your home. While you must keep it running continuously, it is very quiet and uses only a small amount of electricity. In addition to that, it also requires little maintenance. However, it is recommended that you have the system checked regularly by a professional contractor.

If possible, a depressurization system can detect the presence of moisture in a basement through negative pressure field diagnostics. The test is performed in representative locations to gauge the permeability of sub-slab materials. A general evaluation of material permeability can also be performed. It is best to have test holes at least one foot below groundwater level and above frostwalls.