Basement Waterproofing

Basement waterproofing is a process that involves various materials and techniques to prevent water from penetrating a basement. Some of these methods involve laying sealant materials and using sump pumps or drains to remove water. In addition, some types of basement waterproofing can be done below ground level. If your basement is below ground level, you may need to install window wells or a sump pump.

Interior basement waterproofing

Water damage to the basement can cause many problems. Untreated moisture problems can lead to structural problems and mold. Not only is this unpleasant situation unsightly, but it also lowers the value of a home. To combat the problem, interior basement waterproofing is necessary. It is estimated that as many as 60% of homes in the United States have some type of moisture problem.

Hydrostatic pressure from moisture in the soil forces water into the basement, causing mold and structural damage. The most common entry points for seepage are cracks in the concrete foundation and pipe penetrations. Interior basement waterproofing is a great way to stop water from damaging your home and belongings. To prevent this, a polymer-based waterproofing product is applied to the interior walls. These waterproofing materials cure quickly and are semi-flexible.

Another common interior basement waterproofing method is the French drain, which was invented in the late 19th century by Henry French. This method is a simple process that channels condensate water from basement walls into a 1-foot-deep trench. This trench is then filled with perforated pipes and covered with gravel. Moisture in the basement wall collects in the pipes beneath the gravel, and the water can then be pumped out of the basement.

Window wells

A common problem in basement waterproofing is water entering through window wells. While most window wells have drainage systems built in, they can clog up over time and require regular maintenance. This can cause water to accumulate in the window wells during heavy rain or snowfall. To prevent this problem, consider installing a good window well cover.

In addition to window well covers, you can install sump pumps, which prevent water from entering your basement. You can also install egress windows that make it easier to exit your basement in case of an emergency. Adding egress windows is a common solution for older basements and is required in many states. Window wells can also be reduced in strength when you do grading around the home. Additionally, prolonged rains may direct too much water toward the foundation, making them less effective.

To install window wells, you must first excavate the ground near the window. It must be at least a foot deeper than the window well’s diameter. After excavating the area, contractors will install an interior drainage system that will funnel water towards a sump pump or exterior french drain. To reinforce the window well, you can use a plastic or metal wall inside the hole. Then, you can place pea gravel into the hole, filling it to a depth of about two to three inches.

Fast track drainage

One of the most important things you can do to avoid flooding after basement waterproofing is to install a drainage system. This system will help you prevent water from seeping into your home by diverting excess water away from the foundation. The Fast Track drainage system can reduce sediment and allow water to move freely to your sump pump. This can help you avoid costly damage to your foundation and home. Below are some ways to ensure a drainage system is installed properly.

Installing downspouts and gutters can also prevent water from seeping into your basement. Without proper drainage, water can pool near your foundation and basement window, causing water damage. Ideally, these items should be positioned 4-6 feet away from your home. Otherwise, you may have to tear up drywall and flooring to remove the excess water.

Installing a drainage system around the walls of your basement can also help prevent flooding. Water vapor from the ground will enter your basement by capillary action and cause a variety of problems. This is due to the fact that soil is made up of high levels of moisture. It can easily pass through masonry materials, including concrete. Using a drain tile system around the walls and foundation will help reduce the amount of water that can enter your basement.

Sump pump

If you’re concerned that your basement is prone to flooding, you might want to install a sump pump. The pump will prevent water from entering your home and can send messages to your phone when the water level rises. Some systems also have built-in batteries that keep the pump running even in times of heavy rain.

A sump pump is usually installed in a corner of your basement and is connected to a groundwater collection system. The system absorbs water from the terrain and soil surrounding your building. Most sump pumps operate automatically using a pressure sensor and float activator. The sump pump will move water from your basement to a sump tank. Drain tile or rock is then installed along your basement’s foundation to transport water to the sump tank.

An alarm system can also be installed on a sump pump to warn you when it fails to remove water quickly enough. The warning signals can prevent your basement from flooding. You can also choose a smart or wi-fi alarm system, which sends notifications to your smartphone when a pump doesn’t work properly.